Organail shellac is a brand of hybrid Shellac nail coating that goes on as easily as nail polish and yet remains flawless for a minimum of 14 days with the correct application.
Organail Shellac requires the use of Base Coat and Top Coat. .
Organail Shellac requires the use of a 36w uv Lamp or LED Lamp To Cure the gel
Organail shellac Will not work without this process.
Step 1: File, buff and clean nails
Step 2. Apply Organail Base Coat and cure under UV / LED lamp 36w.
Step 3: Apply 1st coat of Organail Colour and cure under UV / LED lamp 36w.
Step 4: Apply 2nd coat of Organail Colour and cure under UV / LED lamp 36w.
Step 5: Apply Organail Top Coat and cure under UV / LED lamp 36w.
Step 6: Remove tacky residue using a lint free wipe and UV cleanser.
Step 1: Gently file the surface of the gel polish to break the seal and remove the shine.
Step 2: Place cotton wool saturated with remover over the nail.
Step 3: Wrap up for 10 minutes then remove gel with wood stick.
Step 4: Use a buffer to lightly buff surface of nail.
Step 5: Apply hand and nail nourish cuticle oil.
Polyurethane Acrylate Oligomer 50-60%,
Special Acrylate Oligomer 20-30%,
Ethylene Glycol Methacrylate 10-20%;
Photoinitiator 5-10%; Pigment 8-10%
LED lamp: 90 seconds
UV Lamp: 120 seconds
To remove the tacky top layer left after curing the UV/LED
Nail Gel, simply apply to a lint free pad and wipe over the cured gel to remove the inhibition layer and make the gel super shiny.
To remove the UV/LED Nail Gel, simply soak nails in the solution then remove the nail gel gently with an orange stick and then finish with cuticle oil.
All bottles are 75ml size which makes them ideal for travelling.
Warning: Keep out of reach of children. Keep away from heat and fire!
Please Note: Organail Nail Gels are designed to be used in layers. This allows you to use multiple nail gels together as well as the special effects nail gels to achieve your desired colour and finish. Furthermore, multiple coats may be required especially for lighter colours to achieve your desired colour and finish
Most 4-way nail buffers have the same elements, with each side numbered so that you know to start with ‘side one’ and work your way through to ‘side four’.
However, there are always some exceptions, so I’ll take you through the sides based on the fabulous Manicare 4 Way Buffer.
Side one: File – perfect for getting your nails to your preferred shape.
Square or rounded, this is the side to use to shape your nail.
Side two: Buff – run this side along your entire nail to help buff away any ridges or peeling.
Take care not to overdo it though, as excessive buffing can damage the nail.
Side three: Polish – uses a finer buffer to help smooth down the new nail surface and reach any tiny imperfections missed by the buffing step.
Side four: Shine – the final step works to leave a beautiful sheen on your nails so that they’re ready for a slick of polish!
Is wraps Remover for acrylic nail / uv gel / nail polish etc 100% high quality very easy to remover and use.
It can keep your hands beauty and health
Step 1. Break the seal of the gel with sanding file. The top layer must be completely removed.
Removal Tips: Prep. Push cuticles back before filing the top layer to remove with ease.
Step 2. Open the gel remover and wrap the foil around fingers immediately to ensure the product does not evaporate and the heat is insulated in the wrap.
Removal Tips: Wrap it. Fingertips should be fully covered in the wrap.
Step 3. Soak the nail for 10 minutes then check the status.
Removal Tips: Check in! Some colors may need additional removal time. If needed, soak for additional 5 minutes.
Step 4. Remove the wrap from the fingers and gently push the product off of nails with pusher & remover.
Removal Tips: Be light handed. No need to force off the product. The remainder can be easily buffered off.
Some colours may need additional removal time about 5 mins.
if you want Package is Included: 200 x Gel Remover Wraps
Your Organail Boutique gel curing lamp comes ready to be used straight out of the box. To prepare your nail lamp for use, simply follow the following steps:
Inserting the bulbs
Ensure that the lamp is not switched on before you insert the bulbs.
Remove the four included bulbs from their packaging. Before inserting the bulbs, you should first remove the tray at the bottom of your lamp by sliding it outwards. To insert a bulb, insert the plastic end of the bulb in to the socket and push firmly in to the socket. This may take a couple of attempts at first, but once you are comfortable applying the correct amount of pressure, you will find this process much easier. Insert all four bulbs in the same way and ensure they are not loose. Replace the tray by sliding it back in to the base of the lamp.
Instructions: Using your Organail Boutique lamp - The Basics
Complete these steps once all four bulbs have been inserted successfully.
1.Insert the plug in to the wall and switch on at the mains. Press the ON/OFF switch to the 'ON' position.
You have three useful settings which will help you get the most out of your manicure.
To use the lamp in continous mode, ensure the switch marked 1/0/11 is in the middle position marked '0'. Once the switch is in the continuous mode position, press 'Timer Start' to start continous mode. If you use your lamp on continous mode, the lamp will remain on until you turn it off by pressing the ON/OFF switch to the 'OFF' position.
120 sec timer:
If you want a 2 minute cure, ensure you hand is placed comfortably and rested inside the lamp, with all nails which require curing facing upwards. Next, flick the I/0/II to 120 sec timer which is marked 'I', press 'Timer Start' and wait until the light goes off automatically.
If you need to switch off your Organail Boutique gel curing lamp at any time, you can do this just by flicking the 'OFF' button located to the back left of the lamp. This will stop all timers.
Sometimes when you are new to using a nail lamp you may find inserting the bulbs a little more tricky than you feel you should. However, they just require a good sturdy push to insert.
Not necesarily. Have you ensured that the plug is switched on at the mains? Have you ensured you have switched the lamp on at the back, chosen your desired timer AND pressed 'Timer Start'? If you follow all of these steps correctly, your lamp should function properly. If you follow all of these steps and are still experiencing issues, please contact us and we will be happy to help resolve any issues you may have.
In there rare instance that your lamp stops working, we recommend that you try changing the fuse first. If this still doesn't help, please contact us.
If you have any questions about using your lamp, please get in touch with us here and we will be more than happy to help!